Masks were removed on the underside belly window and main spotlight. I used some Future to restore the gloss look to the wingtip lights and the wing lights where needed. I also applied a coat of Mig Ammo North Africa Dust to the wheels to provide a basis for their weathering to match the base.
Wheels were further weathered with some of the dry Light Dust pigments to complete their look.
I used the plane to determine where to place the main wheel chocks on the PSP section of the base and placed the fire extinguisher with some Gator Grip Thin Blend so I could get those elements in place.
Last, but not least, I added the pilot figure to the right side wing. Gator Grip Thin Blend again to the rescue as the figure has to stand just so to be placed correctly in position and the Gator Grip is always more forgiving vs. CA or similar.
That meant it was time to bring it all together for a combined set of walk-arounds.
And, for good measure, I did a set for just the Corsair itself before it was added to the base:
